« previous next »
Pages: [1]   Go Down

Author Topic: Dropped an engine  (Read 424 times)

Offline wildcat65

  • Crazy about Buick!
  • *****
  • Posts: 144
Dropped an engine
« on: April 19, 2010, 10:17:26 AM »
In my 65 Skylark GS project...finallly...
I bought the car w/o engine, yesterday was the first time the front springs have felt the weight of a
Nailhead in many years!   Its looking good, chrome valve covers, chrome air cleaner look.
( I have aluminum rocker covers too, just in case  :laughing7:)
I want to get this thing running soon.
Is there gas tanks available for these cars (new)?
Which tubing company is making the brake lines/fuel lines?

Thanks!

Ted
Logged
Ted Nagel         65 Skylark GS 4-speed + Wildcats + GS's

Offline Jay GS conv

  • Buick Fan
  • ***
  • Posts: 20
Re: Dropped an engine
« Reply #1 on: April 19, 2010, 02:09:48 PM »
Hey Ted,

I got a tank from the parts place, but I think they are all made in Canada from the same place.
Year one and original parts group both carry the tanks.
As far as tubes I got mine from inline tube they fit nicely both the brake and fuel lines, there number is 800-385-9452
Another one that people have used is classic tube 800-882-3711

Jay
Logged

Offline Mark Ascher

  • Administrator
  • Crazy about Buick!
  • *****
  • Posts: 564
Re: Dropped an engine
« Reply #2 on: April 19, 2010, 06:44:29 PM »
Ted,

I got my tank from Tamraz - made in Canada. As Jay said, go with Inline Tube. They used the long, front to back lines that run along the frame  from my car as patterns. So they should fit. They also had the only rear axle hard lines and the front crossmember crossover line that fit too.

Get the tank insulator pad from Patton Glade.

Mark
Logged
65 GS HT 4 Speed
66 Impala 396/TH400/12 Bolt
95 Roadmaster Wagon
69 Bel Air 2 Door Sedan "Project Junior Stock"

Offline WkillGS

  • Administrator
  • Crazy about Buick!
  • *****
  • Posts: 680
Re: Dropped an engine
« Reply #3 on: April 19, 2010, 07:53:56 PM »
Tanks are made by Quanta products:
http://www.quantaproducts.com/products.asp?dept=608
Shop around for the best deal....and be aware of shipping cost!
Logged
Walt K
Eastern Pa

66 GS Astro Blue/blue 425 auto
66 GS Silver Mist/black 401 4 spd
66 GS Flame Red/black 401 5 spd
66 GS Saddle Mist/black 401 L76 auto
66 Special Flame Red/black 300 5 spd
65 GS vert Verde Green/ Saddle buckets 401 4 spd
79 Turbo Regal

Offline Bigpig455

  • Crazy about Buick!
  • *****
  • Posts: 82
Re: Dropped an engine
« Reply #4 on: April 26, 2010, 10:17:57 AM »
Can vouch for Inline tube quality - Did  dual cylinder conversion, all brake and fuel lines and hoses with their products, excellent quality..


Rhett
Logged
Finally back to Buicks:

1965 Gran Sport Conv.
1973 Gran Sport Stage 1 4-spd
1966 Corvair Monza Conv.
1972 Pontiac Grandville Conv.

Offline wildcat65

  • Crazy about Buick!
  • *****
  • Posts: 144
Re: Dropped an engine
« Reply #5 on: April 26, 2010, 07:55:40 PM »
Just for testing fit with manifolds and deep pan:



Got to find the inner heater box NOW.
Logged
Ted Nagel         65 Skylark GS 4-speed + Wildcats + GS's

Offline 65postgs

  • Buick Fan
  • ***
  • Posts: 4
Re: Dropped an engine
« Reply #6 on: April 26, 2010, 09:06:45 PM »
Deep pan??  Tell me more..
Logged

Offline Brian

  • Global Moderator
  • Crazy about Buick!
  • *****
  • Posts: 299
Re: Dropped an engine
« Reply #7 on: April 27, 2010, 06:31:37 AM »
I have a good inner and outer heater box sitting in my parts room if you are looking for a set.  They came off of a '65 special I parted out years ago. 
Logged

Offline wildcat65

  • Crazy about Buick!
  • *****
  • Posts: 144
Re: Dropped an engine
« Reply #8 on: April 28, 2010, 08:45:00 AM »
Deep pan is something Carmen Faso fabricated, along with matching pickup tube.    I'll take a picture when I pull this thing back out to install the brake lines
'
Brian- I am interested in the heater boxes! 

Ted
Logged
Ted Nagel         65 Skylark GS 4-speed + Wildcats + GS's

Offline Brian

  • Global Moderator
  • Crazy about Buick!
  • *****
  • Posts: 299
Re: Dropped an engine
« Reply #9 on: April 28, 2010, 08:55:34 AM »
How does $50 sound for the pair?   Send me an Email to  brian@65gs.com
Logged

Offline wildcat65

  • Crazy about Buick!
  • *****
  • Posts: 144
Re: Dropped an engine
« Reply #10 on: April 28, 2010, 10:00:51 AM »
Thanks guys, getting tank and lines ordered today!
Thanks Brian, Mark, Walt and all.  Great site, wish we could get our cars together sooner!
Logged
Ted Nagel         65 Skylark GS 4-speed + Wildcats + GS's

Offline wildcat65

  • Crazy about Buick!
  • *****
  • Posts: 144
Re: Dropped an engine
« Reply #11 on: May 14, 2010, 10:35:50 AM »
Fuel Tank here, brake and fuel lines here- its business time.

Like Elvis, I gots to be TCB  (Takin' Care of Business)    :notworthy:

Logged
Ted Nagel         65 Skylark GS 4-speed + Wildcats + GS's

Offline Chris At 65GS

  • Administrator
  • Crazy about Buick!
  • *****
  • Posts: 744
  • "Fast With Class"
    • 65GS.com
Re: Dropped an engine
« Reply #12 on: August 04, 2010, 10:17:31 PM »
The engine is looking great Ted!

I'm hoping to see her in person next year at BPG.

Chris
Logged
-= Howitzer with Windshield Wipers =-

   65 GS Coupe
   65 GS Convertible

www.DamnGoodAutoParts.com   
www.65GS.com
Pages: [1]   Go Up
« previous next »